Gel Straight-Through Cable Joint for Low Voltage Power Cables
The Gel Straight-Through Joint is designed for reliable connection of low voltage polymeric-insulated cables. Featuring a high-quality gel-filled enclosure and an integrated connection block, it provides effective moisture protection, electrical insulation and mechanical protection for indoor, outdoor and underground cable installations.
Key Advantages
Gel Insulation Technology
Moisture Protection
Copper & Aluminium Conductors
UV & Flame Resistant Housing
Construction
| Product Type | Gel Straight-Through Joint |
| Technology | Gel |
| Voltage Rating | 0.6/1 (1.2) kV |
| Cable Type | Polymeric-Insulated Cable |
| Number of Cores | 3 / 4 / 5 cores |
| Conductor Material | Copper / Aluminium |
| Cross-Section per Conductor | 1.5–6 mm² |
| Joint Body | Shockproof Plastic Housing |
| Connection | Multi-Range Connection Block |
| Installation | Indoor / Outdoor / Underground |
| Water Application | According to Test Standard |
| Length | 146 mm |
| Width | 55 mm |
| Height | 35 mm |
| Cable Diameter | 11–19 mm |
| Standards | DIN EN 50393 / DIN EN 60695-2-11 |
Application
Suitable for indoor, outdoor and underground cable installations.
From Production to Delivery
From raw material preparation to final shipmen, every stage is caretuly controled to ensure consistent conductor quality, reliable pertormance,and sae delivery. Our roduction,
inspection, packaging, and logistics processes are managed in accordance with applicable standards and project requirements.
Production
Stranded annealed copper conductors are insulated with XLPE, assembled into the required multicore configuration, optionally filled and bound with polyester tape, then covered with the specified black PVC sheath.
Inspection
Inspection focuses on conductor construction, insulation condition, core identification, sheath integrity, overall diameter, conductor resistance and test-voltage requirements against the approved technical schedule.
Packaging
Finished cable is wound on suitable drums according to ordered size, weight and length. Cable ends are protected and drum identification can include cable type, conductor size, core count, length and project reference.
Shipping
Before shipment, cable drums and technical documents are checked against the order. Inspection records, identification data and requested test documentation can be prepared for the customer.
faq
What is a Gel Straight-Through Joint?
A Gel Straight-Through Joint is a cable accessory used to connect two cable sections while providing electrical insulation, moisture protection and mechanical protection around the connection.
What is the advantage of gel technology?
Gel technology provides effective sealing around the connector area without requiring heat or curing. It also allows the joint to be re-accessed for inspection or maintenance.
Can it be used with copper and aluminium conductors?
Yes. Suitable EASYCELL configurations are designed for both copper and aluminium conductors.
What cable sizes are available?
The range covers conductor cross-sections from 1.5 mm² to 25 mm², with individual models covering different cable and core configurations.
Does installation require heating equipment?
No. Gel straight-through joints use gel-based sealing and do not require heat-shrink equipment.
What is the typical lead time for orders?
Typical production lead times:
- Standard specifications (common sizes): 7-15 working days after order confirmation
- Custom specifications or special requirements: 15-25 working days
- Large volume orders: production schedule confirmed at time of order
We also maintain inventory of fast-moving standard sizes for immediate shipment. Transit time depends on destination port and shipping method. We can ship by sea (most cost-effective for large orders), air (urgent shipments), or rail (for Central Asian destinations).
Request for Free Consultation
Contact Information
Send us your cable requirements and our team will respond quickly with product recommendations, technical support and quotation details.
