Eye Links — Type ZH
ZH eye links connect an elongated loop to a circular eye arranged in a perpendicular plane. This geometry changes the connection orientation between adjoining fittings in an overhead line assembly. The loop provides space for its mating component, while the eye forms a separate pin connection at the opposite end. The ZH-7 model is made from hot-dip galvanised steel. Its loop opening, eye diameter, end thickness and connecting height help buyers assess the fit alongside the required mechanical rating, assembly clearance and the dimensions of the neighbouring hardware.
Product Overview
The ZH body has two distinct interfaces: an elongated closed loop and a drilled eye. These right-angle eye links are selected by checking the loop width C and internal length h1 against one mating part, then the eye diameter and thickness b against the other. The h dimension locates the two connection positions within the assembly.
Table 1 lists the dimensions and rated failure load of ZH-7. Its circular eye and change of plane distinguish it from a PH extension link, whose elongated loop lies in one plane. A shared failure-load value therefore does not establish interchangeability between the two products.
Key Features
- Perpendicular connection planes: The loop and eye present different orientations to the adjoining hardware.
- Separate loop and eye dimensions: Each end can be checked against the particular component it receives.
- Defined connecting height: The h dimension helps locate the eye relative to the load-bearing part of the loop.
- Galvanised steel body: The ZH link body is made from hot-dip galvanised steel.
Product Applications
- Insulator string link positions: installed between a loop-compatible fitting and an eye-compatible fitting where the string layout changes the connection plane.
- Overhead line clamp connection assemblies: connects adjoining hardware in the clamp-to-string linkage where the assembly drawing includes a ZH loop-and-eye interface.
Technical Specifications
Eye Links (Type ZH)
| Catalog No. | Dimensions(mm) | Rated Failure Load(kN) | Weight(kg) | |||||
|---|---|---|---|---|---|---|---|---|
| a | b | C | φ | h₁ | h | |||
| ZH-7 | 16 | 16 | 24 | 20 | 57 | 95 | 70 | 0.5 |
Request the Complete Data Sheet
From Production to Delivery
From raw material preparation to final shipmen, every stage is caretuly controled to ensure consistent conductor quality, reliable pertormance,and sae delivery. Our roduction,
inspection, packaging, and logistics processes are managed in accordance with applicable standards and project requirements.
Production
The general production sequence forms the loop-and-eye body, finishes the eye opening and prepares the steel surface for hot-dip galvanising. The chosen body geometry determines the machining and finishing details.
Inspection
Inspection focuses on the relationship between the two connection planes, the loop opening, eye dimensions and coating condition. Any mechanical test record is linked to the specified ZH model.
Packaging
Packing separates the links so that the eye edges and loop surfaces are protected during handling. Identification records the ZH model and quantity.
Shipping
Shipment documentation identifies the loop-and-eye fitting separately from PH extension links and includes the applicable order references.
Frequently Asked Questions
How do ZH eye links for insulator strings differ from PH extension links?
ZH has an elongated loop and a circular eye in different planes. PH uses an elongated loop to extend the connection. Their mating interfaces and required assembly space differ, even when their rated failure loads are the same.
Does ZH-7 have a 70 kN working load?
The 70 kN value in Table 1 is a rated failure load, not an allowable working load. The permissible service load depends on the design criteria and the complete assembly, including the mating components.
Can the eye hole alone establish whether an existing fitting will fit?
The eye hole is only one interface dimension. The eye thickness, loop opening, loop section, connection height and surrounding clearance also affect fit. An existing-part sketch showing both ends makes a replacement enquiry more precise.
What information is needed to enquire about Eye Links — Type ZH?
Provide the ZH model or a dimensioned sketch, the mating parts at both ends, required mechanical rating, quantity and destination. Include the available assembly space and any specified coating or inspection requirements.
Request for Free Consultation
Contact Information
Send us your cable requirements and our team will respond quickly with product recommendations, technical support and quotation details.

